Rooftop solar, engineered for Pakistan's sun.
On‑grid, hybrid and battery‑ready solar systems — site‑surveyed and sized to your actual electricity bill, not a generic package.
A complete solar build, not just panels.
Every solar project covers design, structural mounting, wiring and the paperwork that gets you connected.
Load & site survey
Roof measurement, shading analysis and a review of your monthly electricity consumption before any design work starts.
On‑grid, hybrid or off‑grid
We size the system and inverter type to match how you actually want to use power — including battery backup where needed.
Net‑metering paperwork
We complete and submit net‑metering documentation with your local distribution company as part of commissioning.
From roof survey to live monitoring, in four stages.
Skip a stage and yield suffers — here's exactly how a Tri‑Vision solar system gets built.
Site survey & design
We measure roof, shading and monthly consumption before modeling layout and expected yield.
Structural mounting
Galvanized steel frames anchored and engineered for local wind load, before any panel goes up.
Panel & DC/AC wiring
Panels strung, inverters mounted, every connection torqued and tested against spec.
Handover & monitoring
System energized, net‑metering paperwork completed, live monitoring handed over.
See roughly what solar could look like for you.
A quick, rough estimate based on your average monthly bill — your free site survey will confirm the real numbers.
Estimate only, for illustration — assumes typical Islamabad sun hours and a blended grid rate. Your actual recommended system size and savings will be confirmed after a free site survey, and depend on your roof, shading, and real consumption pattern.
Residential and commercial systems, ready to spec.
Starting points — every system is re‑sized to your bill and roof before installation.
Residential System
For a mid‑to‑large household running AC, pumps and appliances.
- On‑grid or hybrid
- Net‑metering ready
- Battery optional
Commercial System
An entry point for small offices, clinics and retail units cutting daytime draw.
- Net‑metering ready
- Fast daytime payback
- Three‑phase available
Residential System
For larger homes or heavier backup needs, pairs well with battery storage.
- Battery‑ready
- Evening independence
- Hybrid inverter
Commercial System
Built for higher daytime loads — workshops, warehouses, commercial plazas.
- Three‑phase ready
- Higher daytime offset
- Scalable design
Rooftops we've wired, panel by panel.
A look at recent solar installations across Pakistan — from steel racking to commissioned arrays.
