Fire alarm systems, engineered to give you time.
Detection, alarm and monitoring systems designed around your building's layout — not a one‑size panel bolted to the nearest wall.
A complete detection & alarm build.
Every fire alarm project is designed around your building's zones, occupancy and existing electrical layout.
Smoke & heat detectors
Placed by room type and ceiling height, not a flat grid — kitchens, plant rooms and corridors each need different sensing.
Control panels & zoning
Zoned panels so an alert tells you where the trigger is, not just that one exists somewhere in the building.
Manual call points
Break‑glass call points positioned along evacuation routes and at exits, per standard spacing guidance.
Sounders & strobes
Audible and visual alarms sized for the space, so the warning actually carries through noise and closed doors.
Suppression integration
Where a building also has fire fighting or sprinkler infrastructure, we integrate detection with that system.
Monitoring & testing
A testing schedule and documentation trail so the system stays reliable long after installation day.
From site assessment to certified handover.
A properly zoned system starts with understanding the building, not the panel.
01 · Site & risk assessment
We walk the building, note occupancy, layout and existing wiring before proposing a zoning plan.
02 · System design
Detector types, zoning and panel placement are mapped out and confirmed with you before ordering equipment.
03 · Installation & wiring
Detectors, call points and sounders are wired to the panel and mounted to spec across every zone.
04 · Testing & handover
Every zone is tested, documentation is handed over, and we walk your team through the panel.